Trailers

offer

Przyczepa PP35-8825

2

The largest of the trailers for transporting boats and yachts we offer is a braked, two-axle model with a GVM up to 3500 kg.

ikona dmc
up to 3500 kg
ikona długości przyczepy
8600 mm
ikona szerokości przyczepy
2038 mm

ROBUST CONSTRUCTION FOR SPECIAL TASKS


 

The PP35-8825 trailer is equipped with a parking and overrun brake. Its stable structure is guaranteed by a specially designed guide with wheels and keel rollers, located along the loading surface. The entire structure is connected by five transverse supports, the location of which can be freely adjusted.

In the frame, we can regulate the arrangement of supports, sets of wheels and bottom rollers. Individual adjustment of these elements is important, in particular in case of trailer rentals and companies transporting boats, yachts and similar equipment.


PRACTICAL SOLUTIONS


 

Thanks to the LIGHT UP system used on the trailer, it can easily be submerged in water. The system enables failure-free opening and closing of the trailer's rear lamps. It works on the basis of LED lamps and bayonet connectors, which are fully sealed.

The steel elements of the trailer have been hot-dip galvanized. This process protects the material against mechanical damages and corrosion. Thanks to this and the previously described LIGHT UP system, the trailer can be easily immersed in water or stored outdoors, in the rain. However, we should remember about regular cleaning and maintenance, especially when the trailer comes into contact with salt water.

A two-axle boat trailer offers the ability to independently adjust the position of the axle depending on the center of gravity of the transported load. This model also has a WPS (Waterproof system), i.e. an additional sealing of the hubs. This prevents water from getting into the bearings. This provides longer life and slower wear of the hubs and the axles.

 

 

Przyczepa dwuosiowa PP35-8825 do transportu łodzi - tył

 


MORE POSSIBILITIES


 

The PP35-8825 is a large trailer designed for transporting boats and yachts of medium size and weight. Thanks to its dimensions and GVM up to 3500 kg, it can carry a load weighing nearly 2700 kg. Although the standard length of the trailer allows to transport a boat up to almost 8 m long (exactly 7.8 m), thanks to the lamp extension system used on the trailer, its possibilities are increased by as much as 80 cm, allowing you to transport cargo up to 8.6 m.

The trailer does not have a rear bumper beam. However, it was equipped with the so-called cradle and wheels to assist in bringing the boat in and out of the trailer.

przyczepa podłodziowa dwuosiowa do łodzi jachtów 3500 DMC lampy LED kołyska oświetlenie

 

STABLE HOLDING OF THE BOAT



The PP35-8825 trailer has a stable, double frame on which two types of side supports are mounted: double and quadruple. Each of them has polyurethane wheels with a diameter of 200 mm and steel rims. In the center of the frame, along its sides, there is an additional guide, which stiffens and stabilizes the whole structure. The guide has bottom supports in the form of five sets of polyurethane wheels and the so-called cradle equipped with three bottom rollers and three sets of wheels. All the wheels on the guide have a diameter of 260 mm and are equipped with metal rims.

A cradle and a system of wheels on the guide help in placing and later unloading the load from the trailer.

Przyczepa dwuosiowa PP35-8825 do transportu łodzi kołyska pozycja 1
Przyczepa dwuosiowa PP35-8825 do transportu łodzi kołyska pozycja 2
Przyczepa dwuosiowa PP35-8825 do transportu łodzi kołyska pozycja 3

The front side supports can be adjusted in height, rotated by 90 degrees and also the method of attachment can be changed. Similar solutions are used in case of the middle and rear brackets, but here we can additionally adjust the angle of their inclination from 60 to 90 degrees.

The polyurethane wheels used on the trailer are highly resistant to abrasion and mechanical damage. Their extraordinary advantage is also that they do not leave marks or scratches on the boat.

 

PRACTICAL ACCESSORIES AND EQUIPMENT OF A BOAT TRAILER



For the convenience of use, the trailer has as standard (apart from the previously described) accessories such as: an adjustable winch post with a manual belt winch, a soft bow, a support wheel, cradle and side supports system.  

Our customers often decide on additional equipment in the form of shock absorbers with fasteners, polyurethane bow and polyurethane bottom rollers, spare wheel with fastening, aluminum rims, drum washing, boat guidance system, anti-skid side step, additional set of belt fasteners, anti-theft protection or supports adjustable to the side wheels.

We offer individual modification of brackets in the trailer by placing additional:

  • adjustable side supports with two wheels (Ø 200 mm) with a steel rim;
  • adjustable side supports with four wheels (Ø 200 mm) with a steel rim.

Note: Boats and yachts with non-standard constructions or converted to individual orders require individual settings of brackets and wheels.

We also carry out our own customer requests, according to which we can make a trailer painted in white or black.

 

 

 

 

SAFE ROAD...

 

 

 

Technical data
Przyczepa PP35-8825
Gross vehicle weight [kg]
3500
Maximum length of the loading surface [mm]
8600
Maximum width of the loading surface [mm]
2038
Load capacity [kg]
2674
Complete kerb weight [kg]
826
External dimensions width x length x height [mm]
2526 x 8801
Number of axles
2
Axles type
braked
Wheels type
185R14C
Bottom support (Ø 260 wheels on a steel rim)
16
Bottom roller [pieces]
8
Podpora boczna podwójna z poliuretanowymi kołami fi 200 [sztuk]
2
Podpora boczna poczwórna z poliuretanowymi kołami fi 200 [sztuk]
4

Standard equipment

Overrun brake
Parking brake
Tilting lamp system
LED rear lamps
Support wheel/ Jockey wheel
Manual winch
Set of belt fasteners
Adjustable winch post
Cradle
Movable axis system
Side supports with two wheels
Side supports with four wheels

Additional equipment

Polyurethane stem
Powder painting
Axle shock mounts
Polyurethane keel roller
Spare wheel
Spare wheel mounting
Rinsing the drums
Boat guidance system
Anti-theft protection
Non-slip side step
Additional set of belt fasteners (4 pcs.)
Aluminum rims
System płukania bębnów
Check our other models