Przyczepa PP15-7023


A braked, single-axle trailer for transporting boats and yachts with a GVM of up to 1500 kg allows to transport a load of up to 1100 kg.

ikona dmc
up to 1500 kg
ikona długości przyczepy
6600 mm
ikona szerokości przyczepy




The trailer model PP15-7023 is equipped with a parking and overrun brake. Its stable and strong structure is made of a closed steel profile with a cross section of 80x40. The draw-bar is an integral part of the frame, which is reinforced thanks to the mounted three transverse supports. The location of the supports can be adjusted by yourself, which is particularly important in case of companies transporting boats of various types.

All steel elements of the trailer are hot-dip galvanized. As a result, the trailer is more durable, resistant to impacts and corrosion. In addition, a trailer that has been galvanized can easily stand in the rain or be submerged in water. However, it is important to clean the trailer regularly, especially when it comes into contact with the salt water.


przyczepa podłodziowa jednoosiowa do łodzi jachtów 1500 DMC




The trailer for transporting boats, boats and small yachts has the original LIGHT UP system, which allows the rear lamps to be opened during loading or unloading operations. This solution allows the rear part of the trailer to be safely submerged in the water, so that its lighting system remains undamaged. All thanks to the LED lamps used in it and the bayonet connector, which is fully sealed.

The boat trailer has the ability to adjust the position of the axle in relation to the center of gravity and the WPS system (Waterproof system) system. It is an additional sealing of the hubs, which protects the bearings against water ingress. This allows to significantly extend the life of the bearings, hubs and the axle itself.

This is a trailer designed to transport boats and yachts of medium size and weight, but it allows also successful transport of the loads over 6 meters long. The lamp extension system used on the trailer means that from the standard length of 5.8 meters, its frame unfolds by an additional 80 cm to the size of 6.6 meters.

przyczepa podłodziowa jednoosiowa do łodzi jachtów 1500 DMC lampy schowane

In order to facilitate loading and unloading the trailer, we have eliminated the rear bumper beam and equipped it with the so-called cradle.



The PP15-7023 trailer has two types of side supports - double and quadruple. Each of them has polyurethane wheels with a diameter of 260 mm on plastic rims. The cradle is equipped with two bottom rollers and two sets of polyurethane wheels with a diameter of 260 mm on steel rims.

The polyurethane wheels used in the trailer are characterized by high strength, low weight, high resistance to abrasion and mechanical damage. Due to the use of a large diameter of the wheels (Ø 260), they have a larger contact surface with the transported load, which affects the stability of its transport. An additional advantage of polyurethane wheels is that they do not leave any traces on the surface of the boat.

A cradle (a movable assembly of the rear keel rollers and wheels) helps guide the load onto the trailer. It works by tipping over and conforming to the boat hull as it steers onto the trailer. After loading is completed, it closes automatically. A similar but reverse process occurs when the boat is brought out of the trailer.

Przyczepa jednoosiowa PP18-7023 do transportu łodzi kołyska położenie 3 na płasko
Przyczepa jednoosiowa PP18-7023 do transportu łodzi kołyska położenie 2
Przyczepa jednoosiowa PP18-7023 do transportu łodzi kołyska położenie 1

The front side supports can be adjusted in height, rotated by 90 degrees and also the method of attachment can be changed. Similar solutions are used in case of the rear brackets, but here we can additionally adjust the angle of their inclination from 60 to 90 degrees.



For the convenience of use, the trailer has as standard (apart from the previously described) accessories such as: an adjustable winch post with a manual belt winch, a soft bow, a support wheel and a cradle.

Our customers often decide on additional equipment in the form of shock absorbers with fasteners, polyurethane bow and polyurethane bottom rollers, spare wheel with fastening, aluminum rims, drum washing, boat guidance system, anti-skid side step, additional set of belt fasteners, anti-theft protection or supports adjustable to the side wheels.

We offer individual modification of brackets in the trailer by placing additional:

  • adjustable side supports with two wheels (Ø 260) with a plastic rim;
  • adjustable side supports with four wheels (Ø 260) with a plastic rim.

Note: Boats and yachts with non-standard designs require individual settings for brackets and wheels.

On individual request, we can also provide a trailer painted in white or black.


Przyczepa jednoosiowa PP18-7023 do transportu łodzi zaczep
Przyczepa jednoosiowa PP18-7023 do transportu łodzi wspornik dwukołowy
Przyczepa jednoosiowa PP18-7023 do transportu łodzi hamulec



Technical data
Przyczepa PP15-7023
Gross vehicle weight [kg]
Maximum length of the loading surface [mm]
Load capacity [kg]
Complete kerb weight [kg]
External dimensions width x length x height [mm]
2326 x 7001
Number of axles
Axles type
Wheels type
Bottom support (Ø 260 wheels on a steel rim)
Bottom roller [pieces]
Adjustable side supports with two wheels (Ø 260)
Adjustable side supports with four wheels (Ø 260)

Standard equipment

Overrun brake
Parking brake
Tilting lamp system
LED rear lamps
Support wheel/ Jockey wheel
Manual winch
Set of belt fasteners
Adjustable winch post
Movable axis system
Side supports with two wheels
Side supports with four wheels

Additional equipment

Polyurethane stem
Powder painting
Axle shock mounts
Polyurethane keel roller
Spare wheel
Spare wheel mounting
Rinsing the drums
Boat guidance system
Anti-theft protection
Non-slip side step
Additional set of belt fasteners (4 pcs.)
Aluminum rims
System płukania bębnów
Check our other models