Search...
Close this search box.

Trailers

offer

Trailer PP35-8825

2

The largest of the trailers for transporting boats and yachts we offer is a braked, two-axle model with a GVM up to 3500 kg.

dmc icon
up to 3500 kg
trailer length icon
8600mm
trailer width icon

ROBUST CONSTRUCTION FOR SPECIAL TASKS


 

The PP35-8825 trailer is equipped with a parking and overrun brake. Its stable structure is guaranteed by a specially designed guide with wheels and keel rollers, located along the loading surface. The entire structure is connected by five transverse supports, the location of which can be freely adjusted.

In the frame, we can regulate the arrangement of supports, sets of wheels and bottom rollers. Individual adjustment of these elements is important, in particular in case of trailer rentals and companies transporting boats, yachts and similar equipment.


PRACTICAL SOLUTIONS


 

Thanks to the LIGHT UP system used on the trailer, it can easily be submerged in water. The system enables failure-free opening and closing of the trailer's rear lamps. It works on the basis of LED lamps and bayonet connectors, which are fully sealed.

The steel elements of the trailer have been hot-dip galvanized. This process protects the material against mechanical damages and corrosion. Thanks to this and the previously described LIGHT UP system, the trailer can be easily immersed in water or stored outdoors, in the rain. However, we should remember about regular cleaning and maintenance, especially when the trailer comes into contact with salt water.

A two-axle boat trailer offers the ability to independently adjust the position of the axle depending on the center of gravity of the transported load. This model also has a WPS (Waterproof system), i.e. an additional sealing of the hubs. This prevents water from getting into the bearings. This provides longer life and slower wear of the hubs and the axles.

 


MORE POSSIBILITIES


 

The PP35-8825 is a large trailer designed for transporting boats and yachts of medium size and weight. Thanks to its dimensions and GVM up to 3500 kg, it can carry a load weighing nearly 2700 kg. Although the standard length of the trailer allows to transport a boat up to almost 8 m long (exactly 7.8 m), thanks to the lamp extension system used on the trailer, its possibilities are increased by as much as 80 cm, allowing you to transport cargo up to 8.6 m.

The trailer does not have a rear bumper beam. However, it was equipped with the so-called cradle and wheels to assist in bringing the boat in and out of the trailer.

 

STABLE HOLDING OF THE BOAT*



The PP35-8823 trailer is a braked model equipped with two axles designed for transporting heavy boats and yachts. It allows you to load boats weighing above 2800 kg and having a length until of 8.1 m. PP35-8825 it has a stable, double frame on which they are mounted two types of side supports: double and quadruple. Each of them is equipped with polyurethane wheels. In the middle of the frame, along its sides, there is an additional guide that stiffens and stabilizes the structure. There are bottom supports on the guide in the form of five sets of polyurethane wheels and the so-called cradle equipped with three bottom rollers and three sets of wheels.

A cradle and a system of wheels on the guide help in placing and later unloading the load from the trailer.

The front side supports can be adjusted in height, rotated by 90 degrees and also the method of attachment can be changed. Similar solutions are used in case of the middle and rear brackets, but here we can additionally adjust the angle of their inclination from 60 to 90 degrees.

The polyurethane wheels used on the trailer are highly resistant to abrasion and mechanical damage. Their extraordinary advantage is also that they do not leave marks or scratches on the boat.

NOTE: Due to the nature of the material of the side and bottom support wheels, they may differ in colour from those shown in the photos.

*Dadt option

ADDITIONAL OPTIONS


 

Rolls

Kiper roaches

Roaches

Clamping brackets

 

PRACTICAL ACCESSORIES AND EQUIPMENT OF A BOAT TRAILER



For the convenience of use, the trailer has as standard (apart from the previously described) accessories such as: an adjustable winch post with a manual belt winch, a soft bow, a support wheel, cradle and side supports system.  

Our customers often decide on additional equipment in the form of shock absorbers with fasteners, polyurethane bow and polyurethane bottom rollers, spare wheel with fastening, aluminum rims, drum washing, boat guidance system, anti-skid side step, additional set of belt fasteners, anti-theft protection or supports adjustable to the side wheels.

We offer individual modification of brackets in the trailer by placing additional:

  • adjustable side supports with two wheels;
  • adjustable side supports with four wheels.

Note: Boats and yachts with non-standard constructions or converted to individual orders require individual settings of brackets and wheels.

We also carry out our own customer requests, according to which we can make a trailer painted in white or black.

Note: The products presented in the photographs may differ slightly from the originals. The contents of the website are for information purposes only and do not constitute a commercial offer within the meaning of the Civil Code.

 

 

 

 

 

 

Technical data
Trailer PP35-8825
Gross vehicle weight [kg]
3500
Maximum length of the loading surface [mm]
8600
Load capacity [kg]
2674
Complete kerb weight [kg]
826
External dimensions width x length x height [mm]
2478x8801x1554
Number of axles
2
Axles type
braked
Wheels type
185R14C
Bottom support (wheels diameter 195 on a steel rim)
16
Bottom roller [pieces]
8
Side support double with polyurethane wheels diameter 195 [pieces]
2
Side support quadruple with polyurethane wheels diameter 195 [pieces]
4

Standard equipment

Overrun brake
Parking brake
Bottom roller
Bottom support
Tilting lamp system
LED rear lamps
Jockey wheel
Manual winch
Waterproof bearings
Soft stem
Set of belt fasteners
Adjustable winch post
Movable axis system
Side supports with two wheels
Side supports with four wheels

Additional equipment

Polyurethane stem
Powder painting
Polyurethane keel roller
Rinsing the drums
Anti-theft protection
Non-slip side step
Additional set of belt fasteners (4 pcs.)
Aluminum rims
Spare wheel with mountings
Shock absorber with mounting

Check our other models