Trailers

offer

TPM20

1

The trailer for transporting vehicles and machines, TPM20 model, is a device with a solid construction, distinguished by smaller dimensions, while increasing the load capacity, thanks to the construction based on two axles.

to 2700 kg
2681 mm
1256 mm

A TRAILER FOR SPECIAL TASKS


The TPM20 model has a GVW of 2700 kg. It can carry loads of up to 2158 kg, having length about 2.7 and width of 1.25 meters. The trailer frame is reinforced with a special truss and two longitudinal members forming an integral part of the drawbar. A wide gangway with a small approach angle allows you to conveniently enter and retrieve the load from the platform. In addition, the gangway itself is equipped with an independent lock, protecting it against uncontrolled opening. On the sideboards of the MTP20 model, fastening brackets for belts are located, 3 on each side.

Przyczepa do transportu maszyn budowlanych TPM20


CLEVER SOLUTIONS


Access to the load is facilitated by specially prepared steps located on both sides of the trailer. Solid handles closing the overrun gangway ensure a high level of safety during transport. The floor is made of waterproof plywood with a non-slip coating.

The whole structure is protected against corrosion by hot galvanizing. As standard equipment, two mechanisms are available to help stop the vehicle or secure it in the parking: overrun and parking brakes.

In addition, when buying the trailer, the customer will receive, as standard, a support wheel, a spare wheel with mounting and wedges for locking the trailer wheels. Additionally, it can be retrofitted with LED rear lamps.


SAMPLE MODEL CONFIGURATION


  1. Handles attached to the sideboards
  2. Waterproof and non-slip floor plywood
  3. Side panels and steps for convenient access to the load
  4. Spare wheel with mounting
  5. Parking and overrun brake
  6. Support wheel
  7. Locking wedges (set of 2)
  8. Braked axles
  9. A solid ramp
  10. Lamps that can be replaced with LED for an additional fee
Wyposażenie dodatkowe w przyczepie budowlanej TPM 20


STRONGMAN IN ACTION ...

Technical data
TPM20
Gross vehicle weight [kg]
2700
Maximum length of the loading surface [mm]
2681
Maximum width of the loading surface [mm]
1256
Load capacity [kg]
2158
Complete kerb weight [kg]
542
External dimensions width x length x height [mm]
1864 x 4556 x 1895
Number of axles
1
Axles type
braked
Wheels type
185 R14C
Approach angle [degrees]
16°

Standard equipment

Overrun gangway lock
Overrun brake
Parking brake
Handles attached to the sideboards
Wedge for blocking wheels of the car carrier
Support wheel
Spare wheel
Spare wheel mounting
Steps for easier access to loading
Waterproof and non-slip floor plywood

Additional equipment

LED rear lamps
Anti-theft protection
Check our other models